How can I get IPv6 connectivity?

                If you’re an average home user, your ISP will initiate the transition from IPv4 to IPv6 on your network. In most cases, you won’t have to do anything. If you are required to change something, such as your Internet router, your ISP will let you know.

Add caption

Will I be able to access the whole Internet as IPv6 use becomes more common ?

                                  Don’t worry—we’re not doomed. While an IPv4-only machine cannot communicate directly with an IPv6-only machine, there are a number of ways to get them to communicate when using protocol translators. Also, ISPs are developing and deploying new access mechanisms that will allow new Internet
users some IPv4 connectivity through multiple layers of private addressing.

Are the Internet and its technology ready for the transition to IPv6?

      Most of the existing systems that we use today already support IPv6. If you’re using a laptop, odds are, it supports IPv6 and has done so for quite some time. IPv6 is not dramatically different on the network from IPv4, and the machines we used 30 years ago were capable of running IPv6. This means that if the kind of computers operating thirty years ago could run IPv6, then pretty much any cell phone (or even pocket calculator) could run IPv6 today, if you really wanted it to.

Why does every device need an IP address ?


          IP addresses are the numbers that identify devices connected to a network. If your device only needs access to a local network, it can be identified with an address that has only a local context. These are called private addresses. But when your device needs to access services on other networks, it needs to use a unique address. In some cases, this is done by translating a private address into a unique address at the border between your network and your ISP’s network. This technology is called Network Address
Translation, or NAT. NAT has the advantage of allowing multiple devices to share a single, unique address, but it also has
disadvantages. One of these is that the device doing the NAT must understand the protocol being used by the devices communicating through it. If the protocol you want to use is not supported by
the NAT, you cannot use it. This can cause frustration when, for instance, you are unable to use your Voice over IP (VoIP) service
from a hotel or airport lounge while travelling. But there is also a second problem. If a new NAT device does not support a protocol, it will stop the people using the network it serves from also using that protocol, unless it is replaced. This stifles innovation in the services that can be provided over the Internet. Losing innovation means losing access to new services that could enrich our lives. But the variability in the protocols supported by NATs means that services often either work or break depending on the
equipment used by the network operator, not by the setup on the individual user’s computer.

Who sets these policies ?

                  These distribution policies are developed in the RIRs’ regional public policy forums. The process is very similar to the consensus-based, bottom-up approach used to develop other ICANN policies. The RIRs allocate addresses to ISPs and other network operators according to the policies developed in these

public policy forums, in which representatives from industry, governments, and civil societies participate. These forums are open to participation by anyone with access to email. Discussions happen via open, archived mailing lists and at open meetings. RIR membership is not required to fully participate in the policy development process. This means everyday Internet users—including you—can participate. Anyone can submit a global policy proposal. The proposal can be submitted to an individual RIR’s

policy-making process, like any other regional policy proposal, or they can be submitted directly to the Address Supporting Organization Address Council (ASO AC). The ASO AC is the body that makes sure a global policy proposal has reached consensus properly in all five RIR regions before the proposal is sent to the ICANN Board of Directors to be ratified.

How are IPv6 addresses distributed ?

             ICANN’s Board of Directors ratified the policy governing the allocation of IPv6 address space to RIRs in September 2006. The key policy elements are:

■■ RIRs receive IPv6 blocks in /12 units.
■■ RIRs can receive an additional block when they have just one half of a block left.
■■ The number of /12 units RIRs receive is based on a formula established by IANA.

The policy details

         Similar to the IPv4 policy, the IPv6 policy contains a formula for determining when an RIR qualifies for additional IPv6 address space and how much it can receive. To qualify for additional IPv6 address space, the RIR must have less than 50 percent of a /12 left, or it must not have enough space to meet its members’ needs for the coming nine months.

Defining the variables

             The variables in the policy’s formula are available space and necessary space. All an RIR’s IPv6 address space is considered available for allocation unless the space is a reservation that will expire within the next three months, or is fragmented.
The policy’s formula considers recent history and then projects forward to determine how much address space an RIR might need in the future. The formula works this way: First, simple averaging is used to determine the number of addresses allocated per month during the past six months. This average helps determine how much space an RIR is expected to need in the near future. If the RIR’s available space is not enough for the next nine months of allocations, the RIR qualifies for additional address space.

Special needs and the calculation

            Special needs and the calculation determining how much IPv6 space an RIR needs are handled the same in IPv6 as they were for IPv4.

 How were IPv4 addresses distributed ?

IANA assigns addresses based on globally agreed-upon rules, or policies. The key policy elements for IPv4 were:

■■ RIRs received IPv4 blocks in /8 units from IANA.
■■ RIRs could receive an additional block when they had just one half of a block left.
■■ The number of /8 units RIRs received was based on a formula established by IANA.

Two policies governed the allocation of IPv4 addresses to the RIRs. The regular policy was called the Policy for Allocation of IPv4 Blocks to Regional Internet Registries and governed how IPv4 addresses were allocated to RIRs since April 2005. The second, called the Global Policy for the Allocation of the Remaining IPv4 Address Space, governed how the last five IPv4 /8s were allocated. It was ratified in March 2009.

The regular policy

            The regular policy contained a formula for determining when an RIR qualified for additional IPv4 address space and how much address space the RIR could receive. To qualify for additional space, the RIR had to meet one of the following qualifications: it must have had less than 8 million addresses, which is less
than half of a /8, left in its stock of addresses that it could distribute, or it must have lacked sufficient
space to meet its members’ needs for the coming nine months.

Defining the variables 

                  The variables in the policy’s formula were available space and necessary space. All an RIR’s IPv4 address space was considered available for allocation unless the space was a reservation that would expire
within the coming three months, or was fragmented.
A reservation is a block of address space set aside for a particular network operator at a future date. RIRs
sometimes reserve particular blocks for network operators that frequently request more address space. By doing so, the RIR can ensure a sequential allocation in a single, contiguous block, and the network operator can announce these reserved spaces as a single route, reducing the burden on the routing system. Fragmented spaces are blocks of address space that are smaller than the minimum allocation size set by the RIRs’ policy-making community.

            The policy’s formula considered recent history and then projected forward to determine how much
address space an RIR might need in the future. The formula worked this way: First, it used simple
averaging to determine the number of addresses allocated per month during the past six months.
This average helped determine how much space an RIR was expected to need in the near term. If
the RIR’s available space was not enough for the next nine months of allocations, the RIR qualified for
additional address space.

Special facts

           The policy also allowed special facts to be taken into account when calculating how much additional IPv4 address space an RIR qualified to receive. These special facts might have applied if there was a new regional policy or external factors, such as new infrastructure, new services within the region,
technological advances or legal issues. In all cases, the RIR was required to explain the change in
consumption rate or the impact of the new policy, or it had to provide an analysis of the external factors.
If the RIR’s data was not sufficiently clear, IANA could question it. Special facts were almost never used to support requests for additional address space. In fact, RIRs tended to request less address space than they could justify.

The calculation

         Once this data was collected, the calculation could go forward.

Necessary Space = Average Number of Addresses Allocated Monthly during the Past 6 Months x Length of Period in Months 

           Although each RIR provided all this data to ICANN’s IANA Department with its request, most of the data was published every day in a standard format log file, and was mirrored on the IANA FTP site. But whether the calculation was done by ICANN staff or by an observer, using the data published by the
RIRs made calculating the results simple. The numbers could be entered in a spreadsheet that calculated how much space an RIR could receive.

How are IP addresses distributed ?

        IP addresses are distributed in a hierarchical system. As the operator of Internet Assigned NumbersAuthority (IANA) functions, ICANN allocates IP address blocks to the five Regional Internet Registries (RIRs) around the world. (The “regions” of the Regional Internet Registries are roughly continental in size.) The RIRs then allocate smaller IP address blocks to ISPs and other network operators. From there, the ISPs and other Internet operators assign the addresses to the individual Internet connections you are probably accustomed to.

What is IPv6’s history?

                           Standardized in 1996, IPv6 was developed as the next-generation Internet Protocol. One of its main
goals was to massively increase the number of IP addresses available. The first production allocations
were made to ISPs and other network operators in 1999, and by June 2006, IPv6 was successful enough
that important test networks shut down. They were no longer needed.Over the past year, major content providers and access networks have started offering IPv6 services to ordinary Internet users. Because IPv6 is so much larger than IPv4, it should last us considerably longer than the 30 years IPv4 has given us so far. But just how large is IPv6?
IPv6 is significantly bigger than IPv4. Compared to IPv4’s 32-bit address space of four billion addresses, IPv6 has a 128-bit address space, which is 340 undecillion addresses. That’s not a number you hear every day! Using IPv6, ISPs generally assign many thousands of network segments, called a /64, to a single subscriber connection used in places such as a home, classroom, or business. Giving every person on Earth a connection with a /64 would barely dent the available IPv6 address space. In fact, while the
Earth’s orbit around the Sun is only big enough to contain 3,262 Earths put side by side, it would take
21,587,961,064,546 Earths to use all the addresses in the part of the IPv6 space we now use.

What is IPv4’s history?

                      IPv4 has just over four billion unique IP addresses. It was developed in the early 1980s and served the global Internet community for more than three decades. But IPv4 is a finite space, and after years of rapid Internet expansion, its pool of available unallocated addresses has been fully allocated to Internet services providers (ISPs) and users. Only 3.7 billion IPv4 addresses are usable by ordinary Internet access devices. The others are used for special protocols, like IP Multicasting. Almost three and a half billion addresses was enough for the experiment that the Internet started as in the 1980s, but it is not enough for a production network in today’s world, with its population of almost seven billion people.

What do IP addresses look like?

         There are currently two different versions of IP addresses in use—IPv4 and IPv6. The two versions look quite different from one another. IP addresses are actually just long strings of numbers, like 3221226037, but to make it easier for people to read them, we write them down in a special way. IPv4 addresses are written as a string of four numbers between 0 and 255, separated by dots. A typical IPv4 address looks like this: 192.0.2.53. IPv6 addresses are considerably longer strings of numbers, so they are written using hexadecimals, which can fit more information into fewer digits. Colons separate the segments of IPv6 addresses instead of dots; for example, 2001:0db8::53. In fact, when you see two colons side by side in an IPv6 address, you know that all the segments between them contain only zeros. Without those colons, The example  address expands to its fully-written version, 2001:0db8:0000:0000:0000:0000:0000:0053.

How man y IP addresses do I use ?

                    Typically, a residential Internet connection is assigned one unique address and uses a block of private addresses to number each computer, printer, video game console, or smartphone connected to it. But while this address is assigned to the connection we use, the services and peers we communicate with on the Internet also have addresses. There are approximately 3.7 billion addresses available for ordinary Internet connections, and about 1.6 billion people used the Internet in 2009. So, very roughly, each user requires a little over two unique addresses.